Loading Guide

Preparing EnergyPhy content

Skip to main content

ENPMOTSP3P12A001

SP-3P Smart Motor Starter - 12 A

Smart three-phase motor starter rated for 12 A. Designed for pump and borewell automation with HPzenAi-ready control, protection, manual operation, and remote operation workflows.

Identify your product

Match ENPMOTSP3P12A001 to your product label before using these specifications. Ratings and features apply to this SKU, not every model in the family.

Before installation

  1. Check the product and supplied parts for damage.
  2. Confirm the ratings below against the label and supplied installation instructions.
  3. Use qualified personnel for electrical or pressurised-system installation. Isolate power and release pressure before work.
  4. Follow the supplied model-specific wiring and commissioning instructions. If these are missing or unclear, contact support before installation.

Specifications

Specifications

ParameterValue
Product TypeSmart Motor Starter Panel
Phase TypeThree-Phase
Manual OverrideSupported
Manual ON / OFF ButtonsSupported
Relay OutputSupported
LED IndicatorsPresent
Industrial GradeYes

Electrical Specifications

ParameterValue
Input Voltage110VAC to 470VAC
Control OutputRelay Contact Output
Voltage MonitoringSupported
Current MonitoringSupported
NeutralNot Mandatory

Current Transformer (CT) Specifications

ParameterValue
Current Range0 – 60A AC
Accuracy ClassClass 0.1

Relay Specifications

ParameterValue
Number of Relays2
Relay Contact Rating45A @ 270VAC
Relay TypeHigh-Power Electromechanical Relay
Standard Configuration1A + 1C

Contactor Specifications

ParameterValue
Contactor Rating12A
Coil Voltage230VAC
Industrial GradeYes

Motor Control & Protection

ParameterValue
Motor Start / Stop ControlSupported
Automatic OperationSupported
Manual OperationSupported
Dry Run ProtectionSupported
Overload ProtectionSupported
Under Voltage ProtectionSupported
Over Voltage ProtectionSupported
Phase Reversal ProtectionSupported
Fault DetectionSupported

Communication & Integration

ParameterValue
Communication InterfaceRS485
Communication ProtocolModbus RTU
HPzenAi GatewayRS485 (Integrated or External Gateway)
Remote ControlSupported

Construction & Environmental

ParameterValue
Enclosure MaterialAluminium Metal
ColorLight Grey

Product Information

ParameterValue
Product CategorySmart Three-Phase Motor Starter
Dimensions19 × 6 × 10 cm
Weight5 kg

Package contents

  • Motor Starter Unit: Primary control hardware for motor automation and starter panel integration.
  • Installation Guide: Panel setup reference for wiring, commissioning, and service checks.

Use cases

  • Agriculture Irrigation: Supports starter-panel deployments used to run irrigation pumps and field water-distribution systems.
  • Water Pumping: Works in borewell pump control setups that require dependable switching, protection, and remote automation.
  • Industrial Pumping: Supports industrial pump starter applications where structured motor control and fault protection are required.
  • Water Distribution: Fits pumping systems used to move water between tanks, sumps, reservoirs, and distribution lines.
  • Municipal Water Supply: Integrates with public water pumping and transfer systems used in municipal supply and distribution infrastructure.

Warranty

12-month limited warranty

  • Manufacturing defects under standard use conditions
  • Internal electronics and sensor faults verified by support
  • Factory accessory issues reported within the covered service window

Service

  • Remote diagnostics and guided troubleshooting from HPzenAi support
  • Service request coordination for repair or replacement review
  • Availability of spare parts during service life

Eligible direct orders can be reviewed for replacement support for verified transit damage or early manufacturing defects under the applicable policy.

Need help?

Provide your SKU and the symptoms when contacting support. Do not share passwords or recovery secrets.

All motor controllers guides